BEP Marinco Mini Battery Selector Switch – Surface Mount (1-2-Both-Off) 113557 (SUR 701S)
200A Cont – 300A Int – 1000A Crank
200 Amp Continuous – 300 Amp Intermittent – 1000 Amp Cranking
The 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) & Cranking (engine starting – 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
-Housed in the same dimensions as the 701, and includes the same removable side plates and back cover
-Please note selector switches will not separate electronics from harmful engine starting spikes
-Tin-plated copper studs and nuts
-Ignition-protected
