Showing 16–28 of 28 results
Deck Brush STIFF polypropylene
Boat MaintenanceBelow the water line and other tough surfaces Shurhold’s classic series of 6 inch (15 cm) deck brush that easily and positively lock into any Shurhold handle.
StripSpeed
Boat MaintenanceStripspeed must be shaken very well before use to evenly distribute key ingredients for performance. In hotter climates (>30°C / 86°F) Stripspeed needs to be
reapplied approximately every 10 minutes to ensure the surface stays ‘wet’. Removes Propspeed etching primer and topcoat in one-step, in 30 minutes or less*.
Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F).LightSpeed Kit
Boat MaintenanceFoul-release coating for underwater lightspeed kit comes with tools included in the box, process: Disposable gloves, Eye protection, Clean and dry rag
PropSpeed ToolKit
Boat MaintenanceDeveloped to elevate confidence, increase accessibility and empower marine businesses and boaters alike, the Like a Pro toolkit includes a new Coverage Calculator™ app, the Stripspeed™ product, and the new Propspeed application kit.
Waterproofing with PTEF
Boat MaintenanceStar Brite® Waterproofing with PTEF restores water repellency to virtually all marine fabrics from boat covers to Bimini tops.
Boat Wash & Wax
Boat MaintenanceSTARBRITE BOAT WASH & WAX 473ML , Dilute 3 capfuls of Boat Wash and Wax in a bucket of water. Mix well and apply with a sponge, soft cloth or wash brush. Rinse thoroughly with clean water and use a towel, PVA Wipe or chamois to dry.Rub Rail Restorer
Boat MaintenanceShake well before use. Apply to a cloth or sponge and then wipe onto rub rails or other surface to be treated. Use soft cloth to wipe up excess to ensure product is only applied to rub rails and doesn’t run onto the hull or drip. Use as often as needed to maintain shiny appearance.
Premium Marine Polish With PTEF
Boat MaintenanceBefore polishing, wash surface to remove grit and dirt. Shake bottle well. Apply evenly with a clean cloth to a small area in a circular motion while polish is wet.
Premium Teak Care Kit
Boat MaintenanceThe Premium Teak Cleaner, Premium Teak Brightener, and Premium Golden Teak Oil are all formulated using the best, most high-tech ingredients available for long-lasting protection and beauty. This kit is ideal for use on all fine woods and wood furniture.
Premium Golden Teak Oil – Step 3
Boat MaintenanceIf wood is dirty and/or weathered, first treat it with Starbrite Premium Teak Cleaner and Starbrite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood.
Premium Teak Brightener – Step 2
Boat MaintenanceApply with sponge, cloth or brush in direction of wood grain. Allow to remain on surface for 5 minutes then rinse thoroughly with fresh water. For best results, use when temperature is over 50°F. Use of rubber gloves is recommended. Immediately rinse off spills and drips from surfaces not being treated. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer.
Premium Teak Cleaner – Step 1
Boat MaintenancePremium Teak Cleaner is the fastest, easiest way to clean teak and other fine woods to prepare them for oiling. It will safely remove old oils and stains without the need for sanding. Cleans without harsh acids or neutralisers.
Fix15 HT White High Quality Multipurpose Adhesive Sealant
Boat MaintenanceFor use in low movement joints, adhesion and waterproofing in the construction, automotive, marine and aerospace industries where a strong bond and/or UV resistant flexible seal is required.